电源电压范围宽，输出电流大；

　　开关速度快，无瞬间抖动；

　　工作频率宽（0~100KHz）；

　　寿命长、体积小、安装方便；

　　能直接和逻辑电路接口。

ss41f 41f是开关量位置传感器 ss41f 41f特性： ss41f 41f是集成霍尔效应销存性传感器，可用于无刷直流电机换向 位置检测， 速度脉冲信号检测，位置信号检测等.耐压60v,环境温度-40-150度.高灵敏度 ss41f 41f集成磁敏霍尔电压发生器，比较器，抗噪声施密特触 发器，以及集电极开路输出电路。 ss41f 41ff内部电源调整器为片内电路提供带温度补偿稳定电源，满足宽 工作电压范围要求。 ss41f 41f增强型双极锁存霍尔位置传感器集成了多个功能块于一个小封装内的霍尔效应器件，能可 靠工作于永磁场或电磁场，特别适合n／s交变磁场感应。 ss41f 41f内置电源调节器，从而满足3.8v到28v宽工作电压范围。内部集成电源反接保护线路， 防止电源极性意外接反损坏传感器。ss41f 41f片内还集成霍尔电压发生器，温度补偿线路， 比较器，抗噪音施密特触发器及集电极开路输出。 ss41f的特点： ss41f的特点1: 微型封装：3.0mmx4.0mm ss41f的特点2: 速度和转速rpm传感 ss41f的特点3: 工作电压范围：3.8v to 28v ss41f的特点4: -40°c to 150°c ss41f的特点5： 低功耗：5ma max at 4.5vdc ss41f的特点6： 高灵敏度适用环形n／s交变磁场 ss41f的特点7： 高工作频率：0khz-100khz ss41f的特点8： 内置电源反接保护 ss41f的应用 ss41f的应用1：电机和风扇控制 ss41f的应用2: 高灵敏度适用环形n／s交变磁场 ss41f的应用3: f转速表，计数器 ss41f的应用4: 无刷直流电机换向 ss41f的应用5: 流量和流速传感

Wide range of power supply voltage and large output current;

The switching speed is fast and there is no instantaneous jitter.

Wide operating frequency (0 ~ 100KHz);

Long life, small size and convenient installation;

It can interface with logic circuit directly.

Ss41f 41F is a switching position sensor ss41f 41F characteristics: ss41f 41F is an integrated Hall effect pin-off sensor, which can be used for position detection, velocity pulse signal detection, position signal detection, etc. of brushless DC motor commutation position detection. withstand voltage 60v, ambient temperature-40-150 degrees. high sensitivity ss41f 41F integrated magnetic Hall voltage generator, comparator, anti-noise Schmidt trigger, and set. Electrode open circuit output circuit. Ss41f 41ff internal power regulator provides a stable power supply with temperature compensation for the on-chip circuit to meet the requirements of wide operating voltage range. S s 41F 41F enhanced bipolar latched Hall position sensor integrates multiple functional blocks into a small package of Hall effect devices, which can work reliably in permanent magnetic field or electromagnetic field, especially suitable for N / s alternating magnetic field induction. Ss41f 41F has a built-in power regulator to meet a wide operating voltage range from 3.8V to 28v. Internal integrated power supply reverse connection protection circuit to prevent power polarity accidentally connected back to damage the sensor. The SS41f 41F chip also integrates Hall voltage generator, temperature compensation circuit, comparator, anti-noise Schmidt trigger and collector open-circuit output. Ss41f features: ss41f features 1: micro package: 3.0mm x 4.0mm ss41f features 2: speed and speed rpm sensing ss41f features 3: operating voltage range: 3.8V to 28V ss41f features 4: - 40 C to 150 C ss41f features 5: low power consumption: 5mA max at 4.5vdc ss41f features 6: high sensitivity for annular n/s alternating magnetic field ss41f 7: high operating frequency: 0khz-100khz Characteristics of 41F 8: Application of s s 41F with built-in power supply reverse connection protection 1: Application of motor and fan control s s 41F 2: Application of annular n/s alternating magnetic field s s 41F 3: f tachometer, counter s s 41F 4: Application of brushless DC motor commutation s s 41F 5: Flow and velocity sensing

SS41F系列高温双极性霍尔效应集成传感器是由内部电压稳压单元、霍尔电压发生器、差分放大器、温度补偿单元、施密特触发器和集电极开路输出级组成的磁敏传感电路，其输入为磁感应强度，输出是一个数字电压信号。

SS41F series high temperature bipolar Hall effect integrated sensor is composed of internal voltage regulator unit, Hall voltage generator, differential amplifier, temperature compensation unit, Schmidt flip-flop and collector open-circuit output stage. Its input is magnetic induction intensity, and its output is a digital voltage signal.